Legally, all lights on your automobile must be in working course and it's considerable to discriminate set a dead bulb whether the spot should contemporaneous itself. Loosen all four easily-seen bolts using the socket wrench and lay bolts to the side fascinating consideration to get which bolt goes where.3. Once the bolts retain been removed from the motorcar, carefully even firmly pull the comprehensive lighting unit toward you. (The side marker glassy has a seperate clip and you must apply slightly more pressure to that side of the light to receive it loose from the vehicle.)
1. Pop the hood on the van and employ the flashlight to fix the four seperate bolts that fasten the obsessed glowing on the front of the vehivle.
2. The next step-by-step propel is for anyone that owns a 1999-2001 BMW 3 series vehicle.
Instructions
Change a Turn Signal Light on a BMW
4. With the light pulled roughly six inches from the car, carefully loosen the bulb housing unit on the defective turn signal.
5. After removing the bulb, place the new bulb in the socket and gently turn slightly to the left while pushing down. This action will cause the bulb to slide down into the given slots on the housing unit.
6. After securing the bulb, make sure to turn your emergency lights on to see if the bulb is working.
7. If the bulb works, carefully slide the light back into place by applying an equal amount of pressure to the entire housing unit.
8. After the light has been slid firmly back into place, tighten the bolts back into their given grooves and close the hood.
