Boats come in all shapes and sizes, and one of the augmented habitual types of bantam boats are prepared of aluminium. This is going to secure the boat on the stands so you can occupation on it easier.2. Embrace a little, metal drill bit into the drill and tighten the chuck. You hankering this bit to be quite mini -- approximately 1/8 inch or so -- as you're going to use it as a starter bit to remove the rivet.
Instructions
1. Lift the boat outside of the drench with the assist of an assistant and fix it on sawhorses. It's lightweight, facile to shape and quite affordable. On the other hand those boats are normally held stable by rivets, and whether they flying start to loosen, the boat can foster a leak and sink. Replacing the rivets isn't a bull deal, on the other hand it does obtain some especial tools and some patience.
3. Place the drill bit in the center of the rivet you need to replace and start drilling. Drill out the entire length of the rivet.
4. Step up to the next size up drill bit and repeat step 3. Repeat this process until the rivet is completely drilled out of the hole.
5. Insert the replacement aluminum rivet in the hole in the same orientation as the other rivets.
6. Press the rivet gun onto the rivet and pull the trigger. This is going to pull the center of the rivet out of the rivet itself, tightening the rivet and securing the aluminum body.
7. Repeat this process for any other rivets you have that are broken or damaged.
