The fuel filter on the Chevrolet Tahoe is a petite metal canister that is connected to the fuel limit and has a fiber-based membrane inside the canister that acts to Shade any Non-native particles in the fuel utility. Place some nylon plumbers tape around the threads on the bolt that is attached to the fuel line on the carburetor side and hand tighten it into the nut on the fuel filter.5. Place some nylon plumbers tape around the threads of the bolt on the fuel line that goes to the gas tank and hand tighten the bolt into the other end of the fuel filter. Use the open end wrenches to tighten the bolts into the fuel filter on both sides.
1. Establish the fuel filter that is connected to the fuel borderline with inline bolts. The fuel filter is a silver metal cylinder approximately 3 inches enlarged and approximately 2 inches in width, sitting coterminous to the skilled brake cylinder on the firewall.
2. Domicile an unfastened butt end wrench on the bolt attached to the fuel filter on the firewall side of the filter. Place another unlocked aim wrench on the threaded bolt that holds the fuel limit in the filter.
3. Turn the threaded bolt on the fuel edge with a wrench until the limit is chargeless from the fuel filter. Do the same thing with the fuel line on the other side of the filter until it is detached from the line.
4. Locate the arrow mark on the new fuel filter and point it toward the fuel line that is connected to the carburetor. The metal canister is located near the vehicle's crackerjack brake cylinder on the Chauffeur's side of the engine near the firewall. It is a unmarried quota that is welded closed and must be replaced as a full-dress unit. Changing the fuel filter on your Chevrolet Tahoe is perfect manageable and can be done in under an generation.
Instructions
6. Start the engine and check for any signs of leaks in the fuel line. Once you have verified that the filter is working properly, shut off the motor.
