Interchange a GM String Mounted Ignition Switch
The ignition switch is mounted on the steering edge of GM vehicles. When the ignition fails, you committal to transform the switch. The switch is integrated into the ignition cylinder, so both Testament occasion to be replaced by reason of GM uses a transponder inside the ignition pivotal. Replacement important switches can be purchased from a GM dealership. You must own analysis of ownership of your vehicle before a replacement solution and switch can be trumped-up for you. You'll besides essential the year and mannequin of your GM vehicle.
Instructions
1.3. Allot the 1/8-inch access gap under the ignition cylinder and switch meeting. Slide the punch pin into the access hole and push up on the pin to press on the release tab on the underside of the ignition key cylinder.
Remove the screws on the underside of your GM vehicle that control the steering limit involve to the steering contour.2. Pull down on the incorporate to remove it.
4. Turn the ignition key to the "II" position and pull the cylinder out of the steering column with the ignition key while maintaining upward pressure on the punch pin.
5. Remove the pin from the access hole and insert the new ignition cylinder and switch assembly into the steering column until the cylinder locks into the steering column.
6. Secure the steering column cover to the steering column and tighten the screws.
