Remove the Rear Rotor of an Altima
The brakes on a vehivle are typically fix up so that the front brakes discharge most of the grind while the rear brakes detail as an emergency brake very as dispense additional faculty. By reason of of that, they don't call for to be changed identical Often, nevertheless when they cause, the rotor should be turned and the pads replaced at the duplicate time. To do that, you have to remove the rear rotor from your Nissan Altima to be able to take it to a native parts store to receive it turned.
Remove the rear tires using the tire iron and place them to the side.2. Unbolt the brake caliper from the rear of the knuckle, unbolting both the caliper and the bracket that holds it in place.
Instructions
1. Lift up the Nissan Altima using the jack and place it on jack stands. Make sure the vehicle is secure before you crawl underneath it.Lift them off of the rotor and hold them to the side.
3. Pull off the rotor with your free hand and set in on the ground. Place the caliper and caliper bracket on top of the knuckle to rest in place. You can now take the rotor to a native auto parts store to be turned or you can replace it yourself.
