Wire harnesses are designed to simplify vehivle stereo installations.
New machine radio installation is exceptionally assisted by the practice of aftermarket wire harnesses. Designed to interface the aftermarket head unit with the vehicle's existing wiring, these harnesses can be swapped inexpensively provided the radio transfers from one vehicle to the following. Using picnic wire-crimping tools and accessories, the radio harness and the vehicle interface harness are easily mated, moulding the installation of an aftermarket radio less of a guessing amusement.
Instructions
Strip a 1/4 inch of insulation from Everyone wire on both harnesses. Slide a 16-gauge insulated connector over the end of each wire on one harness.4. Crimp the connectors on one harness, using the crimp tool.
2. Match the colours of the radio's harness with the fundamental on the packaging of the aftermarket harness. The aftermarket harness Testament generally keep the wire's avail printed on the wire cardigan.
3.1. Place the installation leading, commence in the User's Tome of the radio. This is regularly as well construct on a sticker on the chassis of the radio.
Slide in the corresponding wires from the other harness into the other end of the crimp connectors, and crimp these in place.
5. Snap the smaller radio end of the radio's harness into the head unit. Clip the larger end of the aftermarket harness to the vehicle's male harness, protruding from the dash opening.
