Changing the thermostat yourself Testament save you bankroll.
The 2000 Toyota Corolla thermostat is a bull entry-level repair that can be completed in a relatively short magnitude of bout. Whether you've positive that you require to avoid the big costs of repair garages and you'd akin to tackle a scarce jobs on your own, then starting off with replacing the thermostat is a extensive fancy. You'll necessitate basic tools and a bantam bit of chronology. Lift the thermostat housing off the intake manifold and push it to the side so you can access the thermostat.3. Pull the thermostat elsewhere of the gap it sits in by pulling up on it.
Due to the domicile of the thermostat embrace, the radiator hose does not enjoy to be removed from the housing to transform the thermostat.
2. Remove the two bolts that control the housing to the Corolla's intake manifold. Save the bolts; they Testament be used again. Changing the thermostat yourself Testament not by oneself save you resources, it can prevent catastrophic failure that could expenditure you thousands of dollars in the impending.
Instructions
1. Allot the housing subsume for the thermostat by finding the residence where the radiator hose connects to the intake manifold of the 2000 Corolla's engine.The thermostat should pull away easily. Pull the paper thermostat gasket off the machined surface of the intake manifold. The gasket sits on the surface of the manifold, not on the thermostat. Both items can be thrown outside. They Testament not be reused.
4. Put the new thermostat into place with the end stamped "top" sitting outside the intake manifold. If the thermostat is placed into the intake manifold upside down, it will not work properly and you risk cracking the housing when bolting it down.
5. Place the new thermostat gasket on to the machined mating surface of the intake manifold, then bolt the thermostat cover back into place using the old bolts. The thermostat cover is cast metal, and it will break if it is tightened too tightly.
