Friday 27 November 2015

Install An All downhill 5205 Dvd Player

Install DVD in the sprint.


A van stereo can be replaced with a contemporary DVD player, such as the Alpine 5205. Installing the Alpine 5205 can be done so passengers will be able to watch DVD movies on monitors that have been installed in the vehicle. You can install the DVD player by first determining what you will need to remove the existing radio or stereo from the vehicle.


Instructions


1. Insert the DIN tool into the holes on each side of the radio. Push the DIN tool outward to release the locking pins and then pull the radio out of the dash.


Connect the wiring harness to the back of the DVD player. Connect any audio lines that are running to an amplifier to the audio outputs.5.


3. Take the mounting sleeve and side brackets out of the Alpine DVD package. Slide the mounting sleeve into the dash and then attach the side bracket to the DVD unit with the screwdriver.


4.2. Disconnect the wiring harness from the back of the radio. Remove the DIN tool and then set the old radio aside.


Insert the DVD player into the dash. Use a screwdriver to push down on the locking pin when pushing in the unit to secure it in the dash.


6. Attach the face plate to the front of the DVD player. Turn on the unit and make sure that it works to complete the installation.