Monday 23 November 2015

Mix Gelcoat Webbing Solution

Mingle Gelcoat Webbing Solution


Webbing solution is an additive to gel coat dye that is used to coin a surface with a spider netting or spattered backlash to it. The event is dependent upon the air impact of the spray gun that you appropriateness to use it-setting the spray gun to 10 to 15 psi creates a spider interlacing eventuality, air force between 5 and 10 psi results in a spattered denouement. The gel coat and webbing notion is mixed the twin; experiment to asset the completion you require. For prime results, come next the directions specific to the manufacturer of the gel coat and webbing solution.


Instructions


1. Determine the total amount of paint you will need. This is the amount of webbing solution you will need. Multiply this number by 2 to determine the amount of gel coat to use.3. Mix the 2 parts gel coat to 1 part webbing solution in a large bucket, using the stirring stick to distribute.


Expect to paint 70 to 100 square feet per gallon of solution.2. Divide the total amount of paint you will need by 3.



4. Fill a spray gun with the mixture and apply to the surface, refilling the spray gun as necessary.