If you duty to alter a window Engine, a speaker, install a window regulator, or you're decent curious how it's connected, you can easily remove the door panel of your Chevy Motor lorry. Removing the door panel Testament be easier than anything you're going To possess to repair or change underneath the door panel. You won't necessitate any fancy tools, on the other hand it Testament balm provided you corner a tiny mechanical skill so you don't gash anything during the procedure.
Instructions
1. Disclosed the door and roll the window all the habit down. Provided the vehicle is equipped with influence windows and locks, turn the ignition interpretation to the "off" position.
2. Gently pry the triangular moulding off of the front corner of the window that covers the interior of the side impression mirror with the flathead screwdriver. It Testament be that identical colour as the door panel and is alone pressed into the door cavity by two press clips and a backside lip that goes into the window cavity.
3. Remove the door lock panel on the door panel by prying it off with the screwdriver. Again, this simply clips onto a metal rod underneath, on the other hand be agreeable and Scansorial at the alike interval.
4. Pry off the door moulding involve enclosing the door ear with the screwdriver. You Testament bear to handle the involve over the hilt once it is paper from the door panel.
Unplug the three plugs from the back of the window/door regulator once removed from the door panel. For manual window doors, you'll need to pry off the door handle molding and locate the screw and remove it with a screwdriver.6.5. Pry off the piece of molding from the arm rest that has all the control buttons for the window regulator and power locks and power mirror control with the screwdriver. Be gentle.
Locate the two screws on the door panel and remove them with the ratchet, extension and a socket. One is located under the arm rest panel you just removed and unplugged in the upper left hand corner. The other is located on the upper side of the arm rest just above the door handle and just below the molding your grab to shut the door.
7. Grab the arm rest and lift the door upward and outward. Though it should start removing from the door, there are still a couple wires attached to it. Don't pull it away roughly from the door just yet.
8. Locate and remove the speaker/tweeter wire plug at the bottom of the door panel.
9. Remove the door panel light (if equipped) by pulling the black plug out of the housing for the light.
10. Lift the door completely away from the vehicle.
