Remove an Ignition Cylinder in a Toyota
The ignition cylinder in a Toyota is devolving on for unlocking the ignition and sending an electric term to the starter Engine. The starter Engine then starts the engine. Nevertheless, when the ignition cylinder breaks, you Testament be able to turn the principal nevertheless won't be able to begin the engine. At this purpose, you must change the cylinder. Replacement ignition cylinders are available from Toyota. By reason of of a defined chip inside Toyota keys, you must compass your original cylinder special-ordered from the Toyota dealership.
Instructions
1. Remove the screws holding your Toyota's steering path include in compass. The exact aim of these screws varies according to the year and imitation of your Toyota.
You are pushing on a release tab on the bottom of the cylinder.4. Turn the ignition key to the "II" position.5.
2. Lift off the steering column cover.3. Slide the punch pin into the small hole on the underside of the ignition cylinder, and push the pin all the way up into the cylinder.
Pull the ignition cylinder out of the steering column while maintaining upward pressure on the Toyota's ignition cylinder release tab.
