Thursday, 10 December 2015

Replace A Tailgate Handle On The Chevrolet Avalanche

A tailgate gets a abundance of call, and that wealth that there's a piece of opportunities for matters to gap. When the tailgate knob on your Motor lorry goes outside, don't despair--it's a 10-minute allot and you'll be back to opening the tailgate on your Chevrolet Avalanche.


1. Pop off the bezel that surrounds the tailgate handgrip on the elsewhere. Clip the linkage to the replacement tailgate handle using the factory clips and your hands.5. Place the handle inside the tailgate and bolt it on, using the factory hardware and the 3/8-inch ratchet and sockets.6.

3. Unclip the two clips that secure the tailgate handle to the linkage. They're color coded, and they unclip by pushing the plastic clip off the linkage itself in a circular motion. This can be done with your hands. No tools are needed.

4. It's held in charming tight, and the easiest course of action to receive it off is to push down from the top, pop outside the top two clips and then pull elsewhere the backside.2. Unbolt the three bolts on the back of the tailgate using the 3/8-inch ratchet and sockets. Clasp the tailgate haft in one artisan while you unbolt with the other, which Testament costless up the tailgate.

Push the factory bezel back into place with your hands, securing the tailgate bezel and completing the job.