Examine coolant hoses on a Honda Accord twice a year, in the spring and fall. Convert hoses older than four senility to make sure the cooling development on the Honda Accord is running smoothly. Closest models are viable To possess plastic filter plugs, appropriate burden not to strip the threads when removing it.
Instructions
1. Air-conditioned the Honda Correspond engine for an period after driving and remove the radiator cap. Lift the front of the automobile with the jack placed in the jacking slots last the front wheels. Appliance jack stands for safety.
2. City a bucket or grasp can under the radiator drain plug and release enough coolant to play down leaking when removing the hoses. Upper hoses need a little fluid removed while lower hoses require draining the radiator.
3.5. Close the drain plug if necessary and refill the radiator with coolant. Replace the radiator cap and start the engine. Look for leaks around the fittings and add coolant if needed after the radiator has circulated.
4. Prepare the new hose by dipping the ends in clean coolant and slide the clamps onto the ends. Push the hose onto the fittings. Turn the hose around if one end is too tight to receive on easily.
Loosen the clamps with a pair of pliers or a nut driver. Slide the clamps to the middle of the hose. Pull and twist the hose until it is free of the nipple. Cut difficult hoses with a knife and peel the hose off the fitting.
