The radiator in a Ford Taurus circulates the coolant ended the engine, cooling it in the advance. Since of its address in the vehicle, the radiator is further susceptible to damage from rocks, and its interpretation makes it susceptible to rust. In either locality, provided the radiator begins to leak, it Testament duty to be constant. To bring about that, you can either corner the radiator repaired by a crack welder, or alter it. Whichever you decide, the anterior system is to remove the radiator.
1. Let the engine chilling for many hours before you labour on the radiator. Unbolt the air conditioning condenser with an open-end wrench.4. Remove the clips holding the transaxle cooling line to the radiator using the flat-head screwdriver.
2. Pop the hood. Disconnect the abrogating and confident terminals on the battery with an open-end wrench. Unbolt the battery tie-down with the 3/8-inch ratchet and socket. Remove the battery from the engine bay. Unbolt the battery tray using the 3/8-inch ratchet, amplitude and sockets. Unclip the relay module mounted on the side of the radiator with your hands and maneuver it to the side.
3. Unbolt the radiator bracket mounting assembly using the 3/8-inch ratchet and socket. Remove the upper and lower radiator hose clamps using the flat-head screwdriver. Pull the hoses off the radiator. Unbolt the radiator shields on the backside of the radiator with the 3/8-inch ratchet and socket. Lift the front of the Taurus with the jack and deposit the void pan below the centre of the radiator, following to the caucasian bleed cock. Conduct the remove cock and empty the radiator into the filter pan.
Remove the fuel line from the radiator using the Ford fuel line disconnect tool. Unbolt the bracket to the fuel line using the 3/8-inch ratchet and socket.
5. Unbolt the lower radiator brackets from the chassis with the 3/8-inch ratchet and socket. Lower the radiator out from the bottom of the Taurus.