Install a Starter in a Chrysler PT Cruiser
The starter on the Chrysler PT Cruiser is at the front of the engine, in the centre of the machine, hurried to the transmission. When it starts to fail, you'll hear a close clicking sound outlook from it when you bid to begin the automobile. In a dispute enjoy this you'll necessitate to install a latest starter nevertheless you longing to be careful approximately what you in reality invest in as a replacement. A starter that has been rebuilt may bear had matchless the chunk that failed replaced to build it operative, while a re-manufactured starter or all the more a different one Testament be comprised of all fresh parts.
1. Disconnect the contradiction battery terminal from the van using a wrench to loosen the seed.
Plug the wiring harness back into the solenoid. Put the engine structural collar back into place and tighten the five bolts using the socket and ratchet.6.
3. Location the electrical wires on the starter using the marker and masking tape. Disconnect the wires using a wrench to remove the nuts. Unplug the wiring harness from the solenoid.
4. Remove the bolts from the starter motor using a ratchet and socket. Pull the starter motor away from the engine and up out of the car.
5. Put the new starter in place and tighten the bolts with the socket and ratchet. Reconnect the electrical wires to the starter and tighten the nuts with the wrench.2. Remove the air cleaner box comprehend by unclipping it and pulling it off. The air cleaner box is a inklike box. Remove the engine structural collar using a socket and ratchet to remove the 5 bolts.
Put the air cleaner cover back on the car and clip it into place. Reconnect the negative battery terminal and tighten the nut with the wrench. Start the car and test the installation.