When the brake drums are bolted for a far-off extent of hour on a trailer rotate, the opportunity of rust and corrosion is going on. The rust and corrosion can consideration the drum to in truth seal itself to the mounting studs and create Emigration of the drum nearly impossible. You can simplify Emigration of the drum beforehand by spraying a canned lubricant onto the trundle studs and letting it sit for a while before attempting to remove the drum. This Testament create the activity easier.
Instructions
This will loosen the tire.4. Slide the wheel off the axle. Place the wheel to the side. Act not takings off the lug nuts until the rotate is off the ground.
2. Uplift the trundle off the ground with a floor jack. Corner the jack to the front of the wheel or along the wheel axle. Place the axle on a jack stand for further support.
3. Take the lug nuts off the wheel studs.1. Loosen the lug nuts with a tire baggage. Employment an air wrench whether the lug nuts are obdurate.
5. Attempt to slide the drum off the brake assembly by hand. Wiggle the drum back and forth to loosen it.
6. Pound the drum with a hammer to break the rust and corrosion that have sealed the drum to the axle. Pound the center with the hammer. Pound the back of the drum with the hammer until it frees itself from the studs.
7. Pull the drum off by hand. The drum is cast iron and heavy.
