Wednesday, 18 February 2015

Fix A Dodge Dakota With Bad Brake Pedal Response

Chrysler pickup trucks, such as the Dodge Dakota, exercise a hydraulic manner to function the brakes at Everyone of the four wheels. This hydraulic operation consists of a proficient cylinder, bent booster and either brake calipers (CD brakes) or turn cylinders (drum brakes). Dangerous pedal response, which is sometime described as the brake pedal enjoyment "spongey," is most generally caused by air trapped inside the hydraulic lines. The step of removing the air from these lines is called brake bleeding.


8. Move to the driver's side rear wheel. The bleeder screw on this wheel will be located on the brake backing plate on the inboard side of the brake drum. Repeat the process used on the two front wheels to bleed this wheel.

3. Unbarred the hood and set the brake skillful cylinder reservoir. It Testament be bolted to the firewall on the Chauffeur's side of the engine bay. Fill the reservoir with latest brake fluid. Create not avow the reservoir to dart dry at any clock during this manner.

4. Set the bleeder screw on the caliper attached to the Chauffeur's side front trundle. Attach a length of unrestrained plastic tubing to the screw. Plunge the other bound of the tube in a jar half plentiful with virgin brake fluid. Do not allow the tube to become uncovered by brake fluid at any time.

5. Have an assistant working inside the vehicle pump the brake pedal up and down a few times and then hold the pedal against the floor. Use a wrench to open the bleeder screw and allow a little fluid to seep out. You will notice tiny air bubbles in the fluid. Close the bleeder screw before releasing the brake pedal.

6. Repeat the process in the above step, until there are no more bubbles in the fluid that seeps out of the bleeder screw.

7. Move to the caliper attached to the passenger's side front wheel, and repeat the process you just used to bleed the first wheel.

1. Stand the vehicle and back with jack stands placed underneath the axles or frame.2. Using a lug wrench remove all four wheels and tires.

9. Move to the passenger's side rear wheel and locate the bleeder screw. Repeat the process used on the other wheels to bleed this wheel.

10. Reinstall the wheels and tires and lower the vehicle.