Monday, 9 February 2015

Replace A Serpentine Belt On The 2001 Ford Taurus

Exchange a Serpentine Sash on a 2001 Ford Taurus

Whether the region on your Ford Taurus is slipping or moulding commotion, it is hour to moderate it. The serpentine girdle is compelled for turning the alternator, saturate pump and other accessories on the engine. Provided the band fails, the engine Testament overheat and the alternator Testament not properly charge the battery. The ignition manner on the van Testament own no Election on the other hand to trail the electricity needed from the battery until the battery dies and then the van Testament no longer fall, leaving you sitting on the side of the pathway.


1. Remove the negative battery cable from the battery with a socket and ratchet. Reinstall the negative battery cable on the negative battery post and tighten the retaining bolt with a wrench. Start the engine and visually verify that the belt is running correctly across the pulleys and the accessories are functioning properly.

The tensioner looks like a pulley on a spring-loaded arm and is typically located between several accessories.

3. Place a 15 mm socket on a ratchet and turn the nut on the front of the tensioner pulley clockwise, releasing the tension for the belt.

4. Remove the belt from the pulleys and discard it. Position a new belt on the pulleys and rotate the tensioner counterclockwise to apply tension to the new belt. When placing the new belt on the pulleys, be sure to follow the same path over the pulleys as the old belt did.

5. Remove the cable from the battery and allot it aside.2. Establish the serpentine belt tensioner on the front of the engine.