Thursday, 8 October 2015

Instructions To Set Up A Chilly Air Intake On The 2008 Dodge Ram

Embellish performance on your Ram pickup with a bitter air intake transaction.

Installing a blasting air intake system Testament outturn increased performance and horsepower. Benumbed air intake systems remove inventory air flow restrictions from Gauze and diesel engines. Owing to algid air is denser that flushed air, it expands when heated, causing a amassed authoritative combustion inside the cylinders. This results in increased energy and fuel efficiency. Most intake kits bear a different air box, high-flow intake tube, reusable air filter and exigent mounting hardware.


1. Conduct the hood and disconnect the denial terminal on the battery.

2. Using a Apartment lodgings screwdriver, loosen the hose clamp connecting the inventory intake hose to the air box. Unclip the tabs on the air box lid and remove the air filter. Remove the mould of the air box by removing the three bolts holding the box to the inner trundle chipper and lift gone the box. Loosen the clamp holding the inventory air intake hose from the intake manifold and remove it.

3. Attach the latest intake housing to the fresh high-flow air intake hose and tighten the hose clamp with a screwdriver. Attach the cutting edge air intake hose to the intake manifold by sliding the rubber boot over the opening and tightening the clamp.

4.6. Reconnect the negative battery lead and close the hood.

Attach the new high-flow filter to the new air intake housing and tighten the clamp with a screwdriver. Examine the installation and make sure there are no gaps in any of the connections. Secure the intake system to the wheel well near the old air box location with fasteners from the intake kit.5. Check hood clearance to ensure the new air intake system has plenty of clearance