Monday, 10 August 2015

Diy Paintless Dent Repair

Dents and dings in your automobile can bring about it eyeful beat up or older than it is. You can remove some dents yourself without having to bring the vehivle in to a target shop. Paintless dent repair is elementary and inexpensive compared to any other construction of dent repair. Paintless dent repair can save you money since you don't have to pay for materials like sandpaper, primer, paint, masking tape and body filler. No special training or skills are needed for paintless dent repair.


1. Look in and around the dent to make sure there are no chips or cracks in the paint.3. Place the plunger on the surface near the dent and make sure the rim is covered with soap and water. Slide the plunger into place over the dent and press it against the car to create a suction.

Find a household plunger. Place a small amount of liquid soap onto the dent and spray or pour water over it. This keeps the area lubricated and makes it easier for the plunger to slide around and over the dent.

If the sheet metal is showing in any areas it should be painted for protection from rust. If there are not chips or cracks in the paint it can most likely be repaired using paintless methods.2.

4. Press the plunger against the car and use a repeated plunging motion, pulling back hard, until the metal moves and the dent is pulled out. The plunger can be slid around over the dent to pull out all damaged areas.