Friday 7 August 2015

Replace A Window Regulator Inside A Grand Am

Replacing a window regulator in a Grand Am does not have need any specialized familiarity in automotive repair in array to full the project within a fair size of period. The Grand Am was built with influence windows that rely on a motorized regulator in cast to measure the window's glass on the inside of either door. After common usage, the regulator Testament sometimes cease to function.


Instructions


1. Remove the motor mount bolts. Take off the motor. Now replace it with a new one. Holding off the switch meeting. Pull the adapter plug from the back of the meeting switch. Detach the switches from the wiring harness.


2. Enlist a counterclockwise motility in form to turn the door handle screws in the right trail. Cut off the door panel. Twist the bolts in the arm rest counterclockwise. Remove the bolts. Situate the bolts and screw to one side. Pull the door handle to take off the pop rivets. These rivets hold the metal to the door panel. Place the panel to one side.


3. Pull the adapter plug. This will detach the wiring harness from the electric motor. Sever the battery's connexion by detaching it. Turn the cold terminal bolt counterclockwise. Corner the terminal to one side. Appliance a screwdriver to pry up the heel of the swtich meeting panel chop. Put the mount bolts back on, then carefully reconnect the unit's wiring harness. Push together the adapter plugs.


4. Put the door panel back on. Push the pop rivets back into place. Hit them gently to get them back into the metal. Restore the door handle screws to their original place. Put back the arm rest bolts. Press the adapter plug in the switch module in order to reconnect the switches. Connect the battery.